Point level detection
ProGap S Microwave Barrier for Level Detection
A microwave barrier for contactless detection of dry bulk solids in containers, piping or shafts. It uses extra-short sensors with a separate analysis unit and now includes filling-signal suppression.

- Insensitive to material caking
- Usable up to a profile of 18 m (59 ft), with larger profiles on request
- With an adapter, usable up to 220 °C (428 °F) and 20 bar (290 psi)
- With ceramic mounting, usable up to 1,000 °C (1,832 °F)
- Usable in dust Ex zones
- Signals through relay switching
- Detects through non-conductive walls
- Extra-short sensor with a separate analysis unit
- Now with filling-signal suppression
Use and function
Where ProGap S fits
ProGap S is a universal sensor made of a transmitter and a receiver, using current microwave technology. It detects the limit level of dry bulk solids of all types, or positions objects, without contact.
It installs in containers, pipelines, shafts or free-fall sections, with a range of 0 to 4 m or 0 to 18 m depending on the model. Larger ranges can be built.
If walls, housings or pipes are non-metallic, the measurement can be made from outside. Non-metallic windows separate the measurement from the process completely, which helps with aggressive, abrasive or coarse materials and with extreme pressures or temperatures.
A process adapter allows use in difficult conditions, including dust Ex zones rated under ATEX. Because it works with microwaves, the sensor is highly insensitive to caking on the sensor window.

Mounting and installation
Mounting transmitter and receiver
The transmitter and receiver each screw into a G 1 in threaded connection. They can be installed at any height, as long as both are at the same height.
Alignment uses a counter-threaded connection, and a signal-intensity display helps with adjustment.
The sensors are powered by the DIN rail electronics, which also provide the relay output.

Technical data
ProGap S specifications
Imperial values are converted from the manufacturer's metric data. Confirm critical values against the product information PDF.
| Material | Housing: stainless steel 1.4571Sensor isolation: POM |
|---|---|
| Protective system | IP 65 |
| Use in Ex zones | As ProGap S Ex sensor in DustEx zone 20/22 and GasEx zone 0/2, only with process adapter |
| Process temperature | −20 to +80 °C (−4 to +176 °F)−20 to +220 °C (−4 to +428 °F) with process adapterUp to 1,000 °C (1,832 °F) with ceramic flange |
| Ambient temperature | −20 to +60 °C (−4 to +140 °F) |
| Working pressure | Max. 1 bar (14.5 psi)Max. 20 bar (290 psi) with process adapter |
| Detection range | 0 to 4 m (13 ft)0 to 18 m (59 ft)Over 18 m on demand |
| Power supply | 24 V DC, powered by the DIN rail electronics |
| Power consumption | Approx. 1.8 VA |
| Current consumption | Max. 100 mA |
| Measuring frequency | K-band 24.125 GHz (±100 MHz) |
| Transmitting power | Max. 5 mW |
| Weight | Transmitter and receiver approx. 560 g (1.2 lb) each |
| Power supply | 24 V DC ±10% |
|---|---|
| Power consumption | 3.5 W |
| Current consumption | 120 mA at 24 V |
| Relay (max.) | 250 V AC / 1 A / 60 W |
| Fall-delay time | 0.25 to 5 s, continuously adjustable |
| Weight | Approx. 172 g (6.1 oz) |
| Protective system | IP 40 |
Common questions
ProGap S FAQ
What does ProGap S detect?
The limit level of dry bulk solids of all types, without contact. It can also position objects.
What range does ProGap S cover?
0 to 4 m or 0 to 18 m (59 ft) depending on the model. Larger ranges can be built on request.
Does material caking affect ProGap S?
It is highly insensitive to caking on the sensor window, because it works with microwaves.
Can ProGap S measure from outside?
Yes, if the walls, housings or pipes are non-metallic. Non-metallic windows separate the measurement from the process completely.
What conditions can ProGap S handle?
−20 to +80 °C and 1 bar as standard, up to 220 °C (428 °F) and 20 bar (290 psi) with a process adapter, and up to 1,000 °C (1,832 °F) with a ceramic flange.
How is ProGap S different from ProGap?
ProGap S uses extra-short sensors with separate DIN rail electronics and a G 1 in thread, and includes filling-signal suppression. ProGap is a compact device with no separate electronics and a G 1½ in thread.
Talk with GTS
Is ProGap S right for your material?
Tell us what material you're detecting, the vessel or pipe size and the process conditions. We'll confirm whether ProGap S fits or recommend a better option.
