Particle size measurement

Dsize Real-Time In-Line Particle Size Measurement

A measuring device for continuous determination of particle size in free-flowing bulk materials of all kinds. It measures directly in the process and in real time, so no sampling is needed.

160–6,000 µmGrain size range
10,000Particles measured per second, up to
85 µmGood / bad grain difference from
6 barMax process pressure (87 psi)
Dsize in-line particle size measuring device
  • Continuous particle size measurement
  • Detects screen damage, overflow and overload
  • Helps adjust and optimize screening and grinding processes
  • Continuous incoming goods inspection
  • Measures directly in the product flow, with no manual sampling
  • Maintenance-free, with self-cleaning optics
  • Easy to integrate into existing systems

Use

Where Dsize fits

Dsize continuously determines the particle size of free-flowing bulk materials of all kinds. The measurement happens directly in the process, in real time, so no sampling is needed.

You can set limit values. Going above or below them triggers an alarm through two relays.

Typical uses

  • Detecting screen damage, clogging and overload
  • Adjusting screening and grinding plants
  • Monitoring knife wear in cutting mills
  • Inspecting incoming goods, including detecting segregation
  • Cutting setup time after product changes

Function

How the particle size is measured

A skimmer in the middle of the sensor continuously diverts a representative part of the product flow and feeds it to an optical measuring system. The material falls through the sensor pipe, where it is measured.

The optics are protected by scratch-resistant borosilicate glass, and purge air keeps them clean.

Dsize Visual software

Dsize Visual operates the measurement and shows the results. It displays the current particle-size distribution continuously, and a second view shows how the distribution changes over time, like a plotter. The distribution can optionally be output over an RS485 interface.

Mounting and installation

Installation in the product pipe

The sensor is installed in the product pipe so the bulk material falls through the measuring section. A purge air connection with instrument air is required.

An optional diffuser spreads the product across the pipe cross-section where that is needed.

Dsize installed in a product pipe
Dsize installation

Technical data

Dsize specifications

Transcribed from the product brochure, with converted units added. Confirm critical values against the brochure PDF.

Measurement
Grain size160 to 6,000 µm
Good / bad grain differenceFrom 85 µm
Particle throughputUp to 10,000 particles per second
Process conditions
Process temperature−10 to +60 °C (14 to 140 °F)
Ambient temperature0 to +40 °C (32 to 104 °F)
Process pressureMax. 6 bar (87 psi)
Purge air qualityInstrument air
Electrical
Supply voltage12 V DC
Current consumption105 mA
Interface1 × RS485
Light output7 mW or less
Mechanical
Sizes200, 250 and 300
Weight40 / 44 / 55 kg (88 / 97 / 121 lb)
Degree of protectionIP 65
Noise level20 dB(A) according to DIN 45635
Housing materialStainless steel 1.4541 (AISI 321)
Optics protectionScratch-resistant borosilicate glass
Certification
ATEX zones2/22
Dsize technical data sheet
Dsize technical data

Common questions

Dsize FAQ

What does Dsize measure?

The particle size of free-flowing bulk materials of all kinds, continuously, directly in the process and in real time.

Does Dsize need samples to be taken?

No. It measures directly in the product flow, so no sampling is needed.

What particle sizes can Dsize measure?

Grain sizes from 160 to 6,000 µm, at up to 10,000 particles per second.

How does Dsize work?

A skimmer diverts a representative part of the product flow to an optical measuring system as the material falls through the sensor pipe. Purge air keeps the optics clean.

What can Dsize detect in a screening process?

Screen damage, clogging, overflow and overload. It also helps adjust and optimize screening and grinding.

How are Dsize results shown?

The Dsize Visual software displays the current grain size distribution continuously and shows how it changes over time. Limit values trigger an alarm through two relays.

Talk with GTS

Is Dsize right for your material?

Tell us what material you're screening or grinding and the size range you need to hold. We'll confirm whether Dsize fits your process.