Industry

Measurement for construction materials

Cement, lime, gypsum, fly ash, sand and aggregates are abrasive, dusty and moved in large volumes. GTS supplies sensors for moisture, mass flow, level and filter monitoring that work with these materials.

Construction materials plant with silos and conveyors
  • Moisture in sand and aggregates
  • Mass flow of cement, lime and fly ash
  • Silo and chute level detection
  • Filter monitoring on dust collectors

Why measure

Where measurement pays off in a building materials plant

Moisture in sand and aggregates changes with the weather and the stockpile, and it changes how much water a batch needs. Online moisture measurement lets the batch adjust to the material instead of a fixed recipe.

Powders such as cement, lime, gypsum and fly ash move by screw, air slide and pneumatic line at high rates. Measuring that flow, watching silo levels and catching a broken filter bag early keeps the plant running and the dust inside.

  • Moisture in sand and aggregates with M-Sens
  • Powder mass flow with SolidFlow
  • High-rate fly ash and cement flow with MaxxFlow HTC
  • Silo and chute level with ProGap
  • Feeder and chute flow / no flow with FlowJam
  • Dust collector filter monitoring with Dusty

Send us the material, the line size and how it is conveyed, and we will recommend a measurement principle.

Typical measurement tasks

Where GTS systems fit in construction materials

Moisture in sand and aggregatesOnline moisture measurement on a conveyor or at a bin outlet, for water correction in batching.
View M-Sens 2 →
Cement and lime mass flowFlow metering of powders in pneumatic lines or free fall, with nothing in the material stream.
View SolidFlow 2.0 →
Fly ash and high-volume powdersFall-through mass flow metering after screws, air slides and rotary valves.
View MaxxFlow HTC →
Silo and chute levelContactless full or empty detection in silos, chutes and shafts, insensitive to caking.
View ProGap →
Chute and feeder flowFlow or no flow detection to catch a blocked chute or an empty feeder.
View FlowJam S →
Dust collector filtersFilter damage monitoring on the clean-gas side of a baghouse.
View Dusty →

Common questions

Construction materials FAQ

What can GTS measure in a construction materials plant?

Moisture in sand and aggregates, mass flow of cement, lime, gypsum and fly ash, fill level in silos and chutes, flow or no flow on feeders, and filter damage on dust collectors.

Can GTS sensors handle abrasive materials?

The systems work with almost all bulk solids, including abrasive ones. MaxxFlow HTC uses a ceramic liner against wear, SolidFlow has nothing in the material stream, and ProGap measures without contact.

How is fly ash metered at high flow rates?

MaxxFlow HTC is installed after screws, air slides or rotary valves. The cross-section stays completely open, and there is no real upper limit on mass flow.

How is sand moisture measured?

Online with M-Sens, mounted where the material passes. M-Sens 2 covers 0 to 65% moisture depending on the material and records both surface and capillary moisture.

How do I detect a broken filter bag?

Dusty mounts in the clean gas duct after the filter and detects filter damage immediately, with an alarm output and an optional 4 to 20 mA trend signal.

Talk with GTS

Have a building materials process to measure?

Tell us the material, the line size and how it moves. We will tell you which measurement principle fits and what to expect from it.