Industry
Solids measurement for food and feed production
Food plants have to meet hygiene rules while keeping output up and costs down. GTS measures flow, speed, moisture, level and density in grains, powders and feed, with hygiene treated as a core requirement.

- Flow metering of grains, powders and spices
- Moisture in meal and potato powder
- Flow / no flow on feed lines
- Level and bulk density measurement
Why measure
Hygiene first, then output and cost
Every food line answers to food safety rules before anything else. Within those rules, the gains come from knowing what the line is doing: how much baking powder leaves the screw, how wet the maize meal is, whether the animal feed is still flowing.
Several GTS sensors measure without touching the product. SolidFlow has nothing in the material stream, and ProGap and FlowJam detect material contactlessly with microwaves.
- Grain speed in free fall with SpeedFlow
- High-volume grain flow with MaxxFlow HTC
- Baking powder and spice dosing with SolidFlow
- Moisture in maize meal and potato powder with M-Sens
- Flow / no flow for sugar beet pulp and animal feed with FlowJam
- Fill level with ProGap
Tell us your food-contact and cleaning requirements up front, and we will factor them into the recommendation.

Application examples
GTS systems in food and feed production

View SpeedFlow →

View MaxxFlow HTC →

View FlowJam S →

Ask about bulk density →

View ProGap →

View M-Sens 2 →

View SolidFlow 2.0 →

View SolidFlow 2.0 →

View FlowJam S →

View M-Sens 2 →
Systems for this industry
Measurement systems used in food and feed production
Solids flow metersSolidFlow 2.0Microwave mass flow measurement of dust, powder and granules in metal pipes, in free fall or pneumatic conveying.View SolidFlow 2.0 →
Solids flow metersMaxxFlow HTCFall-through meter for high mass flow rates after mechanical conveyors, with a completely open cross-section.View MaxxFlow HTC →
Solids velocitySpeedFlowContinuous speed measurement of powder, granules and dust in metal pipes, in free fall or pneumatic lines.View SpeedFlow →
Moisture measurementM-Sens 2Continuous moisture measurement in dry bulk solids. Records surface and capillary moisture, independent of the material flow.View M-Sens 2 →
Flow / no flow detectionFlowJam SMicrowave detector that signals flow or no flow for solids of all types. Sees through deposits and non-conductive walls.View FlowJam S →
Point level detectionProGapMicrowave barrier for contactless detection of bulk solids in containers, pipes and shafts. Insensitive to material caking.View ProGap →
Common questions
Food and feed FAQ
What does GTS measure in food and feed plants?
Flow of grains, powders and spices, particle speed, moisture, flow or no flow, fill level and bulk density. The examples on this page include grain, sugar beet pulp, coffee powder, maize meal, baking powder and animal feed.
Do the sensors touch the product?
Many do not. SolidFlow mounts with nothing in the material stream, and ProGap and FlowJam detect material contactlessly with microwaves. Tell us your food-contact requirements and we will confirm the right setup.
How is spice or baking powder dosing measured?
With SolidFlow, a microwave sensor for metal pipes. It measures after a conveyor screw or in free fall and retrofits through a weld-on socket.
Can GTS measure grain at high volumes?
Yes. MaxxFlow HTC handles high mass flow rates in free fall after mechanical conveyors, with a completely open cross-section. SpeedFlow measures grain speed in free fall or pneumatic lines.
How is moisture measured in meal or potato powder?
Online with M-Sens, on a slide or in the material flow. M-Sens 2 records surface and capillary moisture and covers 0 to 65% depending on the material.
Talk with GTS
Have a food or feed line to measure?
Tell us the material, the line size and how it moves. We will tell you which measurement principle fits and what to expect from it.
