Industry
Measurement for construction materials
Cement, lime, gypsum, fly ash, sand and aggregates are abrasive, dusty and moved in large volumes. GTS supplies sensors for moisture, mass flow, level and filter monitoring that work with these materials.

- Moisture in sand and aggregates
- Mass flow of cement, lime and fly ash
- Silo and chute level detection
- Filter monitoring on dust collectors
Why measure
Where measurement pays off in a building materials plant
Moisture in sand and aggregates changes with the weather and the stockpile, and it changes how much water a batch needs. Online moisture measurement lets the batch adjust to the material instead of a fixed recipe.
Powders such as cement, lime, gypsum and fly ash move by screw, air slide and pneumatic line at high rates. Measuring that flow, watching silo levels and catching a broken filter bag early keeps the plant running and the dust inside.
- Moisture in sand and aggregates with M-Sens
- Powder mass flow with SolidFlow
- High-rate fly ash and cement flow with MaxxFlow HTC
- Silo and chute level with ProGap
- Feeder and chute flow / no flow with FlowJam
- Dust collector filter monitoring with Dusty
Send us the material, the line size and how it is conveyed, and we will recommend a measurement principle.
Typical measurement tasks
Where GTS systems fit in construction materials
View M-Sens 2 →
View SolidFlow 2.0 →
View MaxxFlow HTC →
View ProGap →
View FlowJam S →
View Dusty →
Systems for this industry
Measurement systems used in construction materials plants
Moisture measurementM-Sens 2Continuous moisture measurement in dry bulk solids. Records surface and capillary moisture, independent of the material flow.View M-Sens 2 →
Solids flow metersSolidFlow 2.0Microwave mass flow measurement of dust, powder and granules in metal pipes, in free fall or pneumatic conveying.View SolidFlow 2.0 →
Solids flow metersMaxxFlow HTCFall-through meter for high mass flow rates after mechanical conveyors, with a completely open cross-section.View MaxxFlow HTC →
Point level detectionProGapMicrowave barrier for contactless detection of bulk solids in containers, pipes and shafts. Insensitive to material caking.View ProGap →
Flow / no flow detectionFlowJam SMicrowave detector that signals flow or no flow for solids of all types. Sees through deposits and non-conductive walls.View FlowJam S →
Dust emission monitoringDustyTriboelectric filter monitor for the clean-gas side. Detects filter breaks without delay and works with all dust types.View Dusty →
Common questions
Construction materials FAQ
What can GTS measure in a construction materials plant?
Moisture in sand and aggregates, mass flow of cement, lime, gypsum and fly ash, fill level in silos and chutes, flow or no flow on feeders, and filter damage on dust collectors.
Can GTS sensors handle abrasive materials?
The systems work with almost all bulk solids, including abrasive ones. MaxxFlow HTC uses a ceramic liner against wear, SolidFlow has nothing in the material stream, and ProGap measures without contact.
How is fly ash metered at high flow rates?
MaxxFlow HTC is installed after screws, air slides or rotary valves. The cross-section stays completely open, and there is no real upper limit on mass flow.
How is sand moisture measured?
Online with M-Sens, mounted where the material passes. M-Sens 2 covers 0 to 65% moisture depending on the material and records both surface and capillary moisture.
How do I detect a broken filter bag?
Dusty mounts in the clean gas duct after the filter and detects filter damage immediately, with an alarm output and an optional 4 to 20 mA trend signal.
Talk with GTS
Have a building materials process to measure?
Tell us the material, the line size and how it moves. We will tell you which measurement principle fits and what to expect from it.
