Industry
Process measurement for the chemical industry
GTS measures mass flow, moisture and dust emissions in chemical plants while production runs. The systems are maintenance-free and work with almost all bulk solids, including abrasive, corrosive and otherwise aggressive materials.

- Online measurement while the process runs
- Maintenance-free operation
- Works with almost all bulk solids
- Handles abrasive, corrosive and aggressive materials
Why measure
Increased process safety in chemical plants
Chemical processes depend on knowing how much material is moving, how wet it is, and whether the filters are still holding. GTS covers all three with online sensors, so operators see a change when it happens instead of after a lab sample comes back.
The aim is the same on every installation: assured quality during manufacturing, a safer plant, and better environmental protection. Continuous readings also give you the records that a process safety management program relies on.
- Mass flow of powders and granules in free fall or pneumatic lines
- Moisture in dryers, mixers, screws and container outlets
- Filter damage on the clean-gas side of a dust collector
Not sure which principle suits your material? Send us the material, line size and how it is conveyed, and we will recommend one.

Application examples
GTS systems in chemical processes

View M-Sens 2 →

View SolidFlow 2.0 →

View Dusty →
Systems for this industry
Measurement systems used in chemical plants
Solids flow metersSolidFlow 2.0Microwave mass flow measurement of dust, powder and granules in metal pipes, in free fall or pneumatic conveying.View SolidFlow 2.0 →
Moisture measurementM-Sens 2Continuous moisture measurement in dry bulk solids. Records surface and capillary moisture, independent of the material flow.View M-Sens 2 →
Dust emission monitoringDustyTriboelectric filter monitor for the clean-gas side. Detects filter breaks without delay and works with all dust types.View Dusty →
Common questions
Chemical industry FAQ
What can GTS measure in a chemical plant?
Mass flow, moisture and dust. SolidFlow measures the mass flow of powders and granules in metal pipes, M-Sens 2 measures moisture continuously, and Dusty monitors filters on the clean-gas side for damage.
Do the sensors work with corrosive or abrasive materials?
Yes. The systems work with almost all bulk solids, including abrasive, corrosive and otherwise aggressive materials. Tell us the material and we will confirm the right sensor and wetted parts.
How is moisture measured in a fluid bed system?
M-Sens 2 sits in the material and measures continuously. It records both surface and capillary moisture, covers 0 to 65% depending on the material, and is temperature-resistant up to 120 °C (248 °F).
How do I know when a filter fails?
Dusty is a triboelectric monitor mounted in the clean gas channel after the filter. It detects filter damage immediately, gives an electronic alarm output, and can be expanded to a 4 to 20 mA trend signal.
Does the mass flow sensor obstruct the pipe?
No. SolidFlow has nothing installed in the material stream. It mounts through a weld-on socket, which makes it a simple retrofit, and it measures throughput up to 20 t/h.
Talk with GTS
Have a chemical process to measure?
Tell us the material, the line size and how it moves. We will tell you which measurement principle fits and what to expect from it.
