Industry
Measurement for energy and environmental plants
GTS supplies solids measuring systems for power plants and waste incineration: flow metering of lime, coke and fly ash, fill level monitoring in waste chutes, and flow detection on fuel lances. The goal is less downtime, more safety and higher productivity.

- Less downtime on feed and dosing lines
- Safer production processes
- Flow metering of lime, coke and fly ash
- Fill level and flow / no flow monitoring
Why measure
Minimize downtime, increase safety and productivity
Waste incinerators and coal-fired power plants run on steady solids feeds. Lime is dosed as a pollutant bonding agent, hearth furnace coke and brown coal coke dust are metered into the process, and fly ash has to be carried away at high rates. When one of those feeds drifts or stops, the plant finds out late unless the line is measured.
GTS brings experience from many of these applications and helps you find a solution that meets the requirements and standards of your industry.
- Flow metering of lime, coke and coke dust with SolidFlow
- High-rate fly ash metering with MaxxFlow HTC
- Fill level monitoring in waste chutes with ProGap
- Flow / no flow indication on fuel lances with FlowJam
- Moisture measurement in fly ash
Each of these runs online, so a blocked lance or an empty dosing line shows up as a signal in the control room.

Application examples
GTS systems in energy and environmental plants

View ProGap →

View SolidFlow 2.0 →

View MaxxFlow HTC →

View FlowJam S →

View SolidFlow 2.0 →

View SolidFlow 2.0 →

View SolidFlow 2.0 →

View SolidFlow 2.0 →

Moisture measurement systems →
Systems for this industry
Measurement systems used in energy and environmental plants
Solids flow metersSolidFlow 2.0Microwave mass flow measurement of dust, powder and granules in metal pipes, in free fall or pneumatic conveying.View SolidFlow 2.0 →
Solids flow metersMaxxFlow HTCFall-through meter for high mass flow rates after mechanical conveyors, with a completely open cross-section.View MaxxFlow HTC →
Point level detectionProGapMicrowave barrier for contactless detection of bulk solids in containers, pipes and shafts. Insensitive to material caking.View ProGap →
Flow / no flow detectionFlowJam SMicrowave detector that signals flow or no flow for solids of all types. Sees through deposits and non-conductive walls.View FlowJam S →
Common questions
Energy and environment FAQ
Which GTS systems are used in power plants and waste incinerators?
SolidFlow for flow metering of lime, hearth furnace coke and brown coal coke dust, MaxxFlow HTC for fly ash, ProGap for fill level in waste chutes, and FlowJam for flow / no flow monitoring on fuel lances.
How do you measure lime or coke dosing?
With SolidFlow, a microwave sensor for metal pipes that works in free fall and in pneumatic conveying. Nothing is installed in the material stream, it retrofits through a weld-on socket, and it measures throughput up to 20 t/h.
How do you meter fly ash at high flow rates?
MaxxFlow HTC is a fall-through meter installed after mechanical conveyors such as screws, air slides and rotary valves. The cross-section stays completely open, there is no real upper limit on mass flow, and a ceramic liner resists wear.
How can I detect a blocked fuel lance?
FlowJam is a microwave detector that signals flow or no flow without touching the material. It is insensitive to deposits, detects through non-conductive walls, and picks up both clogging and standstill.
How is the fill level in a waste chute monitored?
ProGap is a microwave barrier that detects material without contact across a profile of up to 18 m (59 ft). It is insensitive to caking and, with ceramic mounting, usable up to 1,000 °C (1,832 °F).
Talk with GTS
Have a feed line that needs measuring?
Tell us the material, the line size and how it moves. We will tell you which measurement principle fits and what to expect from it.
